Product Description
Pioneer Eclipse TimberBond Wood Floor Finish Bonder
Pioneer Eclipse TimberBond is a ready-to-use wood floor bonding agent designed to prepare properly cleaned wood floors for dust-free recoating.
TimberBond chemically prepares the existing finish surface so a new topcoat can properly adhere. It is used as part of the TimberBond wood floor recoating system after TimberClean Deep Scrub and TimberClean cleaning steps, then followed by a compatible TimberGuard finish topcoat.
Product Data
- Product: Pioneer Eclipse TimberBond
- Manufacturer Part Number: 717GL3PE
- Pioneer Product Code: 717GL3PE
- Monster SKU: 717GL3PE
- Brand: Pioneer Eclipse
- Product Type: Wood floor finish bonding agent / recoat bonder
- Package Size: 3 x 1 gallon
- Container: 1 gallon wide-mouth bottle
- Application: Wood floor recoating, dust-free recoating, finish adhesion preparation
- Surfaces: Commercial, residential, and sports wood floors
- Dilution: Ready-to-use / no dilution required
- Color / Appearance: Milky white liquid
- Fragrance: Characteristic / mild odor
- pH: 9.0
- Coverage Rate: 2,500 to 3,000 ft² per gallon
- Dry Time: 1 hour per coat
- Topcoat Window: Apply topcoat within 6 hours
- VOC: <120 g/L
- Non-Volatile Solids: 12%
- Density: 8.5 lb/gal
- Shelf Life: 1 year
- Viscosity: <10 centipoise
- Freeze / Thaw: Passes 3 cycles
- Product Liquid Weight: Approximately 25.5 lb for 3 gallons based on 8.5 lb/gal density
- Shipping Weight: Not listed
Dust-Free Recoating
Prepares properly cleaned wood floors for recoating without traditional sanding dust.
Fast Dry Time
Dries in approximately 1 hour per coat with good ventilation and air movement.
Adhesion Support
Chemically prepares the existing finish surface to help the new topcoat bond properly.
Water Clean-Up
Water-soluble formula makes application tool clean-up easier after use.
Recommended Applications
- Wood floor recoating
- Dust-free recoat systems
- Sports wood floor maintenance
- Gym floor recoating preparation
- Commercial wood floor recoat programs
- Residential wood floor recoating where approved
- Adhesion preparation before applying TimberGuard finish
- Schools, gyms, athletic facilities, offices, public buildings, and wood floor maintenance programs
Compatible Equipment & Use
- Microfiber mop
- Pump-up sprayer for large floors
- Compact automatic scrubber for preparation steps
- Red cleaning pad
- Clean towels
- TimberClean Deep Scrub preparation cleaner
- TimberClean cleaner
- TimberGuard finish topcoat
Coverage Information
- Coverage Rate: 2,500 to 3,000 ft² per gallon
- Minimum Application Rate: Apply at a minimum of 2,500 ft² per gallon
- Dry Time: Allow 1 hour with good ventilation and air movement
- Topcoat Window: Apply topcoat within 6 hours after TimberBond dries
TimberBond System Overview
- Step 1: Deep clean the floor with TimberClean Deep Scrub.
- Step 2: Clean the floor with TimberClean and allow the floor to dry completely.
- Step 3: Apply TimberBond in a thin, uniform layer.
- Step 4: Apply TimberGuard finish according to label instructions.
Preparation Instructions
- Remove all dirt, chewing gum, and debris from the floor.
- Vacuum the floor thoroughly, paying special attention to corners.
- Clean the floor using TimberClean Deep Scrub according to label directions.
- Rinse or clean as directed and remove residue.
- Clean the floor with TimberClean and allow the floor to dry completely before applying TimberBond.
- Complete a test patch in a small, inconspicuous area before treating the full floor.
- Repair deep scratches or gouges before using the TimberBond system.
TimberBond Application Instructions
- Shake TimberBond gently before use.
- Apply a small amount of TimberBond to the floor or directly onto a microfiber mop.
- Spread into a thin, uniform layer using the microfiber mop.
- For large floors, apply TimberBond using a pump-up sprayer.
- Spray a line of TimberBond onto the floor and spread it with the microfiber mop.
- Spray only as far as can be spread in a short amount of time.
- Work around the floor until all areas have been coated.
- Pay special attention to edges, corners, and turns.
- The floor should have a wet appearance, but there should be no puddles.
- Allow TimberBond to dry for 1 hour with good ventilation and air movement.
- If puddles remain and have not dried, wipe the area with a clean, water-dampened rag.
- Apply the topcoat within 6 hours.
Important Use Notes
- Do not use on paste wax finishes.
- Do not use on oil finishes.
- Do not use if the existing finish is worn to the point where bare wood is exposed.
- A test patch is always recommended before full application.
- Missed spots may result in poor adhesion to the topcoat.
- If the 6-hour topcoat window has passed, tack the floor with TimberClean to remove airborne dust, then reapply TimberBond.
- Read all product directions and Safety Data Sheets before use.
Clean-Up & Storage
- Clean application tools with water after use.
- Store tools in an airtight container after cleaning.
- Dispose of unused product according to local, state, and federal regulations.
- Store TimberBond in a climate-controlled environment.
- Keep from freezing.
- Do not store above 100°F / 38°C.
- Keep container sealed when not in use.
Key Benefits
- Single-component wood floor bonding layer
- Prepares wood floors for dust-free recoating
- Helps improve adhesion of the finish topcoat
- Dries in approximately 1 hour
- Water-soluble for easy clean-up
- Ready-to-use formula
- Coverage rate of 2,500 to 3,000 ft² per gallon
- Strong fit for gym, sports, commercial, and residential wood floor recoat programs
Package Size Options
- 717GL3PE - 3 x 1 gallon case
Documents
Shipping Information
This product ships as a 3 x 1 gallon case of Pioneer Eclipse TimberBond. Product density is listed as 8.5 lb/gal, which equals approximately 25.5 lb of liquid product for 3 gallons. Exact gross shipping weight was not listed in the supplied product information.
Facility & Bulk Purchase Programs
Need Pioneer Eclipse TimberBond, TimberClean, TimberGuard finish, gym floor chemicals, wood floor recoat supplies, pads, auto scrubbers, or commercial wood floor care products for a school, gym, athletic facility, office building, or maintenance program? Monster Janitorial provides product support and commercial purchasing assistance.
Questions? Email sales@monsterjanitorial.com or call 956-772-4842.
Why Choose Monster Janitorial?
- Commercial floor care product support
- Fast order processing
- Expert product support
- Tax-exempt purchasing
Tax-Exempt Purchasing
Create an account and email your tax exemption certificate to sales@monsterjanitorial.com.
