Product Description
XPOWER X-600A 2,400 CFM Centrifugal Air Mover
A compact 3-speed commercial air mover with four operating positions, a GFCI daisy-chain outlet, 20-foot power cord, and high-output directional airflow.
Product Overview
The XPOWER X-600A Professional Centrifugal Air Mover delivers up to 2,400 CFM of focused airflow for water-damage restoration, carpet drying, hard-floor maintenance, flood cleanup, construction drying, and commercial facility applications.
Its 1/3 HP motor offers three operating speeds while drawing only 3.8 amps. Four operating positions allow airflow to be directed across floors, beneath carpets, toward walls, or into confined drying areas.
A built-in GFCI-protected daisy-chain outlet helps support multi-unit drying setups, while the lightweight polypropylene housing, molded handle, stackable design, and 20-foot cord make the machine practical for restoration contractors and facility teams.
Quick Highlights
Recommended Applications
Directs concentrated airflow across wet flooring, walls, cabinets, and structural drying areas.
Speeds drying after extraction cleaning, flood recovery, spot treatment, and low-moisture cleaning.
Helps dry commercial floors after scrubbing, wet mopping, stripping, refinishing, and spill cleanup.
Compatible with an optional carpet clamp for directing airflow beneath lifted carpeting.
Supports drying after painting, drywall work, floor installation, renovation, and building repairs.
Suitable for schools, hotels, healthcare facilities, offices, retail stores, and janitorial teams.
Professional Drying Features
Delivers powerful, directional airflow for restoration, carpet cleaning, and commercial drying projects.
Select low, medium, or high airflow to match the surface, room size, sound requirements, and drying conditions.
Position the machine to direct airflow horizontally, upward, toward walls, or into targeted drying areas.
Connect compatible air movers while following the maximum electrical-load rating shown on the machine.
Built-in protection helps safeguard the motor and electrical system during demanding professional operation.
Provides extended reach across commercial rooms, hallways, restoration zones, and occupied facilities.
Durable molded construction withstands routine job-site use while keeping the machine lightweight.
Conserves space in restoration vehicles, storage rooms, warehouses, and equipment fleets.
Add the compatible 600HK telescopic handle and wheel kit for easier transport between work areas.
The compatible 800CC carpet clamp helps hold lifted carpeting while airflow is directed underneath.
A molded carrying handle and compact footprint make the air mover easy to reposition throughout a job site.
Tested and certified for professional electrical safety requirements in the United States and Canada.
Airflow Performance
Lower settings are useful where reduced airflow or sound is preferred. High speed provides maximum drying output for restoration and commercial floor-care applications.
Technical Specifications
| Specification | X-600A |
|---|---|
| Product Type | Professional centrifugal air mover |
| Voltage / Frequency | 115 V / 60 Hz |
| Motor | 1/3 HP |
| Maximum Amp Draw | 3.8 amps |
| Rated Airflow | 2,400 CFM |
| Speed Settings | 3 |
| RPM | 950 / 1,150 / 1,350 RPM |
| Operating Positions | 4 |
| GFCI Daisy-Chain Outlet | Yes |
| Dual Thermal Protection | Yes |
| Power Cord Length | 20 ft |
| Housing Material | Polypropylene |
| Stackable | Yes |
| Machine Dimensions | 15.9 × 15.7 × 16.3 in |
| Machine Weight | 19 lb |
| Shipping Dimensions | 16.5 × 16.5 × 17.1 in |
| Shipping Weight | 23.1 lb |
| Safety Certification | ETL / CETL |
| Warranty | 1-year limited manufacturer warranty |
| UPC | 848025068014 |
Best For
- Water-damage restoration contractors
- Professional carpet cleaners
- Flood-recovery operations
- Janitorial and building-service contractors
- Schools and healthcare facilities
- Hotels and multifamily properties
- Hard-floor drying after scrubbing or mopping
- Under-carpet drying with the optional clamp
Important Operating Notes
- Use only with a grounded, GFCI-protected receptacle.
- Do not operate in standing or pooled water.
- Keep the air inlet and outlet unobstructed.
- Observe the auxiliary outlet’s electrical-load rating.
- Do not route the power cord beneath carpeting.
- Disconnect power before cleaning or servicing.
- Allow the machine to cool before storage.
Included with the Air Mover
- XPOWER X-600A centrifugal air mover
- 1/3 HP motor
- Three-speed control switch
- Built-in GFCI daisy-chain outlet
- 20-foot power cord
- Molded carrying handle
- Stackable polypropylene housing
- Owner’s manual
Optional Accessories & Replacement Parts
Shop compatible XPOWER 600 Series accessories and OEM replacement parts directly from Monster Janitorial.
Adds a telescopic transport handle and wheels to compatible XPOWER 600 Series air movers.
Part Number: 600HK
Buy This AccessoryHolds lifted carpet in place while the air mover directs airflow beneath the carpet and pad.
Compatible Series: XPOWER 600 and 800 Series
Buy This AccessoryGenuine OEM fan-side inlet grille that protects the fan and helps prevent debris from entering the housing.
Monster SKU: MJX025005A
Buy This PartShop replacement switches, cords, electrical components, housing parts, fasteners, fan components, and other XPOWER parts.
Compatibility: Confirm model and serial number
Shop XPOWER PartsManuals & Product Documents
Manufacturer Warranty
The XPOWER X-600A is covered by a 1-year limited manufacturer warranty. Coverage is subject to XPOWER’s current terms, exclusions, proof-of-purchase requirements, proper operation, and authorized service procedures.
Frequently Asked Questions
The air mover is rated at up to 2,400 CFM.
The X-600A provides three speeds at approximately 950, 1,150, and 1,350 RPM.
The machine supports four operating positions for directing airflow toward floors, walls, carpets, and targeted drying areas.
Yes. It includes a GFCI-protected auxiliary outlet for compatible equipment. Follow the electrical-load rating shown on the unit.
Yes. The optional XPOWER 600HK kit adds a telescopic handle and wheels to compatible 600 Series air movers.
Yes. The optional XPOWER 800CC carpet clamp holds lifted carpet while airflow is directed underneath.
Yes. Its molded housing is designed for compact storage with other compatible units.
No. Never operate electrical drying equipment in standing or pooled water.
Institutional Purchasing Support
D-U-N-S Number: 080901706
UEI Number: U4TYL7A5LEN9
Purchase orders accepted from approved schools, government agencies, healthcare facilities, property-management companies, and institutions.
Equipment quotes, drying-fleet planning, bid support, and specification assistance are available for facility managers and procurement teams.
Why Choose Monster Janitorial?
- Authorized XPOWER equipment distributor
- Air-mover and drying-fleet selection assistance
- Direct purchase links for compatible accessories
- Access to genuine XPOWER OEM replacement parts
- Manufacturer-document and specification support
- Quotes and purchase-order support for approved organizations
Tax-Exempt Purchasing
Create an account and email your valid tax-exemption certificate to sales@monsterjanitorial.com . For purchasing assistance, call 956-772-4842 .
